Kramer Electronics 6502 User Manual
Page 7
Connecting the 6502 4x1 S/PDIF Switcher / DA
5
5 Connecting the 6502 4x1 S/PDIF Switcher / DA
To connect the
6502 4x1 S/PDIF Switcher / DA, as illustrated in the example
in Figure 2, do the following
1
:
1. Connect
2
up to four digital audio sources (for example, DVD players) to the
INPUT RCA connectors (from 1 to 4).
2. Connect
2
the OUTPUT RCA connectors to up to two digital audio acceptors
(for example, power amplifiers).
3. If required, connect a PC and/or controller to the RS-232 port (see section
5.1).
4. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 2).
Figure 2: Connecting the 6502 4x1 S/PDIF Switcher / DA
1 Switch OFF the power on each device before connecting it to your 6502. After connecting your 6502, switch on its power
and then switch on the power on each device
2 You do not have to connect all the inputs or outputs