Kramer Electronics VP-16x18AK - Manual (Page 28)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-16x18AK Locally via the Front Panel Buttons
24
7.7.1 Storing a Setup Configuration
To store the current status in memory:
1. Press the STO button
1
2. Press one of the OUTPUT SELECTOR buttons from 1 to 18. This is
the preset number in which the current status is stored.
The configuration is stored in the selected preset number.
.
The STO button flashes.
7.7.2 Recalling a Setup Configuration
To recall an input-output configuration:
1. Press the RCL button.
The RCL button flashes.
2. Press the required OUTPUT SELECTOR button (the OUTPUT
SELECTOR button number corresponding to the setup number).
The memory recalls the switching configuration from the selected
preset.
7.8 Locking and Unlocking the Front Panel Buttons
To lock the front panel buttons:
• Press and hold the Lock button until the button LED lights.
The buttons are locked
To unlock the front panel buttons:
• Press and hold the Lock button until the button LED is no longer lit.
The buttons are unlocked
7.9 Reading and Writing the EDID
The VP-16x18AK is delivered with default EDID data programmed in each
input. This can be modified by using the EDID Designer software
2
to read
and write EDID data via RS-232 or Ethernet.
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
2 The software can be downloaded from http://www.kramerelectronics.com