Kramer Electronics VP-61xl - Manual (Page 11)

KRAMER ELECTRONICS LTD. 10
Note:
The Slave "Reply" settings are all ON or all OFF, depending on the requirements
of the system. The Master "Reply" setting is always ON.
9 CONNECTING TO A PC
To connect directly to a PC use the KRAMER Null-Modem Adapter
(recommended) plug one end into the PC's serial port, then connect a 9-pin flat-
cable from the other end to the switcher. To connect without using the KRAMER
Adapter, make connections as in Figure 2, When multi-machines are to be
connected together, make the connections as in Figure 3, or extend pins "5" and
"9" only.
Figure 2: RS-232 Control Connector Wiring
Figure 3: Connecting Multi-Machines