2 the pip button feature, 1 activating the pip feature, The pip button feature – Kramer Electronics VP-730 User Manual

Page 21: N 6.2

Advertising
background image

16

VP-730 - Presentation Switcher / Scaler Buttons

6.2

The PIP Button Feature

The Picture-in-Picture inserter (PIP) uses K-IIT XL™ image insertion technology to
present video and graphic sources simultaneously so that you can display:

•

An inserted video source PIP over a graphic source background

•

An inserted graphic source PIP over a video source background

VIDEO SOURCE – can be composite or s-Video

GRAPHIC SOURCE – can be HDMI, UXGA or component

For example, you can show a live video window on top of a graphic background
and vice versa.

If the HDMI signal is HDCP protected, it cannot appear on a display that is not HDCP

compliant and the machine will not output a picture on the VGA output

The

VP-730 supports three PIP modes:

•

Picture-in-Picture, with a smaller window superimposed over a full screen
image

•

Picture + Picture, where both images are placed side-by-side with the same
height

•

Split, where both images appear side-by-side and the aspect ratios of both
images are maintained

6.2.1

Activating the PIP Feature

Activate the PIP feature in any of the following ways:

•

Press and hold the PIP front panel button while pressing the input button of
the required PIP source

•

Press the PIP key on the IR remote control transmitter (see

Section 6.4

)

•

Access the OSD PIP menu (see

Figure 17

) and selecting PIP On

Advertising