Kramer Electronics VP-773AMP - Manual (Page 4)

VP-773AMP – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 HDCP Compliance 7
3.2 About HDBaseT™ Technology 7
3.3 Using Twisted Pair Cable 7
3.4 Defining the VP-773AMP Presentation Switcher/Scaler 7
4 Installing in a Rack 11
5 Connecting the VP-773AMP 12
5.1 Wiring the RJ-45 Connectors 15
5.2 Connecting the Balanced Stereo Audio Output 16
5.3 Microphone Pinout 16
5.4 Audio Input Pinout 16
6 The OSD Menu 17
6.1 OSD Menu Operation Example 17
6.2 The Input Menu 20
6.3 The Audio Menu 27
6.4 The Process Menu 29
6.5 The Picture Menu 30
6.6 The Enhance Menu 31
6.7 The Scale Menu 32
6.8 The Miscellaneous Menu 35
7 The Display Modes 41
7.1 The Single Window Display Mode 41
7.2 The Dual Window Display Mode 41
8 Controlling the VP-773AMP 46
8.1 Controlling via the Front Panel Buttons 46
8.2 Controlling via the OSD Menu 46
8.3 Controlling via the VP-773AMP Web Pages 47
8.4 Controlling via the Infrared Remote Control Transmitter 51
9 Port Tunneling 53
10 Flash Memory Upgrade 55
11 Technical Specifications 56
11.1 Default Communication Parameters 57
11.2 Input Resolutions 57
11.3 Output Resolutions 58
12 The VP-773AMP RS-232 Communication Protocol 59
12.1 Using the Communication Protocol 59
12.2 Communication Protocol: Mimicking OSD 60
12.3 Protocol Table: Mimicking Remote and Front Panel Buttons 69
12.4 The Protocol 3000 Common Operation Commands 70