Kramer Electronics VP-81KSi - Manual (Page 29)

Operating the VP-81KSi Remotely using a Web Browser
25
Figure 18: Switching an Input to an Output
9.2.2 Operating in the Confirm Mode
By default, the device is set to the At-Once mode.
To operate in the Confirm mode:
1. Click the red Offline button.
The border of the button turns dark.
2. Click the desired switching-point in the switching matrix.
Audio/video indicator outlines appear on the matrix and the Take and Cancel
buttons turn blue.
Figure 19: Switching an Input to an Output
3. Click either Take to accept the changes or Cancel to abandon them.