1 toggling between at once and confirm modes, 2 confirming a switching action, Toggling between at once and confirm modes – Kramer Electronics VP-88K User Manual

Page 23: Confirming a switching action

Advertising
background image

Operating the VP-88K

19

19

The Confirm Mode

In the Confirm mode:

•

You can enter several actions and then confirm them by pressing the TAKE

button to simultaneously activate the multiple switches

•

Every action requires user confirmation which protects against erroneous

switching

•

Execution is delayed

1

7.3.1 Toggling between At Once and Confirm Modes

until the user confirms the action

To toggle between the At Once and Confirm modes:

1. Press the TAKE button to toggle from the At Once mode

2

to the Confirm

mode

3

2. Press the TAKE button to toggle from the Confirm mode back to the At Once

mode.

Actions no longer require user confirmation and the TAKE button no longer

lights.

.

Actions now require user confirmation and the TAKE button lights.

7.3.2 Confirming a Switching Action

To confirm a switching action (in the Confirm mode):

1. Press an output-input combination.

The corresponding input number that is displayed in the STATUS 7-segment

display flashes. The TAKE button also flashes.

2. Press the flashing TAKE button to confirm the action.

The corresponding input number that is displayed in the STATUS 7-segment

display no longer flashes. The TAKE button lights.

To confirm several actions (in the Confirm mode):

1. Press each OUTPUT-INPUT combination in sequence.

The corresponding input numbers that are displayed in the STATUS

7-segment display flash. The TAKE button also flashes.

2. Press the flashing TAKE button to confirm all the actions.

The corresponding input numbers that are displayed in the STATUS

7-segment display no longer flash. The TAKE button lights.



1 If the TAKE button is not pressed within one minute, the action is aborted
2 The TAKE button does not light
3 The TAKE button lights

Advertising