Kramer Electronics VS-162AVRCA - Manual (Page 15)

Installing the Audio-Video Matrix Switcher
11
Refer to section 6.3 for details of how to set the dipswitches, and to section
6.4 for details of how to control this group of interconnected varied-format
16x16 series switchers, and other configurations.
6.3 Dipswitch Settings
Configure the unit by setting the 8 dipswitches as Figure 8 and Table 4
define:
Figure 8: Rear Panel Dipswitches
Table 4: Dipswitch Definitions
Dipswitch # Function:
1-4 Set the MACHINE # (see Table 5 in section 6.3.1)
5 Enables (ON) or disables (OFF) the Follow-SYSTEM mode
6 Enables (ON) or disables (OFF) the SLAVE mode in a multi-channel configuration
7 Disables use of a null modem adapter 1 with RS-232
OFF = RS-232 connection via a null modem adapter
ON = RS-232 connection without a null modem adapter
8 RS-485 termination for first and last machine = ON (RS-485 line terminates with
110 ); for others = OFF (RS-485 line is open)
6.3.1 Setting the MACHINE #
To control a unit via RS-232 or RS-485, each unit has to be identified via its
unique MACHINE #.
Set the MACHINE #
2 on a unit according to Table 5.
A valid MACHINE # is from 1 to 15.
1 See section 6.4.1
2 When using a single unit, set the unit to MACHINE # 1