Kramer Electronics VS-162V User Manual
User manual, Kramer electronics, ltd, Model
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Your Video Matrix Switcher
- 5 Installing the VS-162V in a Rack
- 6 Installing and Operating a Single VS-162V - Overview
- 7 Configuring the VS-162V Video Matrix Switcher
- 8 Understanding Addressing and System Modes
- 9 Connecting a Control Interface
- 9.1 Connecting the RS-232 Control Interface
- 9.1.1 Connecting Two Units with a Null-Modem Adapter
- 9.1.2 Connecting Two Units without a Null-Modem Adapter
- 9.1.3 Connecting to a 9-pin PC COM Port with a Null-Modem Adapter
- 9.1.4 Connecting to a 9-pin PC COM Port without a Null-Modem Adapter
- 9.1.5 Connecting to a 25-pin PC COM Port with a Null-Modem Adapter
- 9.1.6 Connecting to a 25-pin PC COM Port without a Null-Modem Adapter
- 9.2 Connecting the RS-485 Control Interface
- 9.3 Configuring the Sync
- 9.4 Connecting the KEYBOARD EXTENSION
- 9.1 Connecting the RS-232 Control Interface
- 10 Operating Your Video Matrix Switcher
- 11 MENU Commands
- 11.1 Locking and Unlocking the Front Panel
- 11.2 Choosing the Follow or Breakaway from System Mode
- 11.3 Choosing the Video Format Setting
- 11.4 Setting the MACHINE ADDRESS
- 11.5 Choosing the SWITCHING METHOD Setting
- 11.6 Choosing the Extended Keyboard Setting
- 11.7 Setting the STORE/RECALL KEYBOARD Mode
- 11.8 Choosing the INDICATE Setting
- 11.9 Choosing the COMMUNICATION Setting
- 11.10 Setting the IR REMOTE Control
- 11.11 Choosing the AUTO STORE Current SETUP
- 11.12 Identifying the MACHINE
- 11.13 Choosing the Initial RESET
- 12 Upgrading the Flash Memory
- 13 Technical Specifications
- 14 Communication Protocol