8 protocol 3000 syntax, 1 host message format, 1 simple command – Kramer Electronics VS-21HDCP-IR User Manual
Page 16: 2 command string, 2 device message format, 1 device long response, Protocol 3000 syntax, Host message format, Device message format
VS-21HDCP-IR - Protocol 3000 Syntax
13
8
Protocol 3000 Syntax
With Kramer Protocol 3000 you can control the VS-21HDCP-IR from any standard
terminal software (for example, the Windows
®
HyperTerminal Application).
This RS-232/RS-485 communications protocol uses a data rate of 115,200 baud,
no parity, 8 data bits, and 1 stop bit.
8.1
Host Message Format
Start
Address (optional)
Body
Delimiter
#
Destination_id@
Message
CR
8.1.1
Simple Command
Command string with only one command without addressing:
Start
Body
Delimiter
#
Command SP
Parameter_1,Parameter_2,…
CR
8.1.2
Command String
Formal syntax with commands concatenation and addressing:
Start
Address
Body
Delimiter
#
Destination_id@
Command_1
Parameter1_1,Parameter1_2,…|
Command_2
Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,…|…
CR
8.2
Device Message Format
Start
Address (optional)
Body
delimiter
~
Sender_id@
Message
CR LF
8.2.1
Device Long Response
Echoing command:
Start
Address (optional)
Body
Delimiter
~
Sender_id@
Command SP [Param1 ,P
aram2 …] result
CR LF
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
SP = Space (ASCII 32 = 0x20)