Kramer Electronics VS-311H - Manual (Page 16)

VS-311H - Connecting the VS-311H 13
Figure 8: Internet Protocol (TCP/IP) Properties Window
4.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-311H to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45 connectors.
4.5.3 Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the unit via the Ethernet port to
the LAN port of your PC. Use your PC initially to configure the settings (see
Section 4.5 ).