Kramer Electronics VS-3232V - Manual (Page 33)

Operating Your Video Matrix Switcher
29
7.1.1 Viewing the Display
Figure 13 shows the output-input cross-points on the LCD display. The LCD
display can show only 13 input/output combinations at a time from the
available 32.
By shifting the contents of the display to the right or to the left, via the or
the buttons on the front panel, respectively, you can view the full contents
of the display.
This function is enabled when:
The switcher is in between operations 1
Recalling a setup using the or buttons
When entering an OUT IN combination, the contents of the LCD display
automatically shift to indicate the current status of the selected output.
7.2 Using the Selector Buttons
Since the VS-3232V has 32 inputs and outputs (and up to 59 setups that can
be recalled), it can handle two digit numbers as well as one digit numbers (for
numbers under 10). When entering a one-digit number (for example 5), you
can either press 0 followed by 5 or 5 followed by ENT.
The number 00 (or 0, ENT) is relevant for the input only and is used to
disconnect the currently entered output number from the input.
The ESC button is used to cancel an operation without affecting the current
status of the switcher. For example, if a wrong number is entered, press the
ESC button to cancel the operation. The ESC button can also be used for
cancelling a store/recall operation or to exit the setup menu at any stage.
7.3 Confirming Actions
You can choose to work in the At Once (the default
2
) or the Confirm mode.
In the At Once mode (the TAKE button is not illuminated):
Pressing an OUT-IN combination implements the switch immediately
You save time as execution is immediate and actions require no user
confirmation
No protection is offered to correct an erroneous action
1 Waiting for its next operation while all previous operations are complete or cancelled
2 For all actions except storing/recalling