Kramer Electronics VS-41HDCP - Manual (Page 21)

18 VS-41HDCP - Operating the VS-41HDCP
6.6.2 The CONFIGURATIONS Page
The Configurations page lets you view some Ethernet settings and change others
(see Figure 13 ). Fields with a white background are editable; fields with a blue
background are read-only.
To change the configuration definitions:
1. Click CONFIGURATIONS.
The Configurations Web page appears.
2. Modify the values as required.
3. Click the blue Submit button to apply changes or Cancel to abandon them.
A confirmation window appears asking if you are sure you want to change
the network settings.
4. Click Yes.
A window appears informing you that the configuration has been
successfully changed.
5. Click OK.
6. If the IP address has been changed, close your browser and reload the Web
page using the new IP address.
Figure 13: Configurations Page