Kramer Electronics VS-4228 - Manual (Page 17)

14 VS-4228 - Operating the VS-4228
5 Operating the VS-4228
Referring to the connection diagram in Figure 5 , you see the following setup:
Master devices: Port 1 – PC
Port 2 – VTR Serial Controller
Slave devices: Port 3 – Video Player 1
Port 4 – Video Player 2
Port 8 – Video Recorder
The following examples show how to operate the VS-4228:
1. To connect the PC to Video Player 2:
 Press SLAVE 4, then MASTER 1.
The following status displays:
2. To connect the VTR Serial Controller to Video Player 1 and PC to the Video
Recorder:
 Press SLAVE 3, MASTER 2, SLAVE 8 and MASTER 1.
The following status displays:
3. To connect the PC to all slaves:

Press ALL, then MASTER 1.
The following status displays: