Kramer Electronics VS-5x5 - Manual (Page 14)

VS-5x5 - Connecting the VS-5x5 5x5 Video Audio Matrix Switcher 11
5.5.1 Setting the MACHINE #
The MACHINE # determines the position of a VS-5x5 unit, specifying which
VS-5x5 unit is being controlled when several VS-5x5 units connect to a PC or
serial controller. Set the MACHINE # on a VS-5x5 unit via DIPS 1, 2, 3 and 4,
according to the following table.
When using a stand-alone VS-5x5 unit, set the MACHINE # to 1. When
connecting more than one VS-5x5 unit, set the first machine (the Master) that is
closest to the PC, as MACHINE # 1 (all DIP-switches OFF).
MACHINE # DIP-SWITCH
1 2 3 4
1 (Master) OFF OFF OFF OFF
2 ON OFF OFF OFF
3 OFF ON OFF OFF
4 ON ON OFF OFF
5 OFF OFF ON OFF
6 ON OFF ON OFF
7 OFF ON ON OFF
8 ON ON ON OFF