Kramer Electronics VS-88V User Manual
Page 20
Connecting Your 88 Series Matrix Switchers
17
6.3 Connecting an SD-5788V
To connect the
SD-5788V as shown in Figure 6:
1. Connect up to 8 SDI digital video sources (for example, SDI video players)
to INPUT BNC connectors 1 to 8
1
.
2. Connect up to 8 SDI digital video acceptors (for example, SDI displays) to
OUTPUT BNC connectors 1 to 8
1
.
3. Connect up to 2 video acceptors (for example, SDI displays (not shown)) to
the looping SYNC BNC connectors or set the 75 termination switch.
4. If you are using a PC to control the device, connect the serial port of the
controlling device to the RS-232 IN 9-pin D-sub connector.
5. Connect the power cord
2
.
6. Set DIP-switch # 1 OFF and DIP-switches # 2, 3, 4, 5 and 6 ON (see section
7.2.1). The IN SYSTEM button is non-responsive.
Figure 6: Connecting the SD-5788V
1 You are not required to connect all inputs or outputs
2 We recommend that you use only the power cord that is supplied with this machine