Agilent Technologies Agilent RF Switch Driver Board U2121A-101 User Manual
Page 26
16
U2121A-101 Operating Guide
6 The Agilent Interactive IO dialog box will appear. Click Send & Read
to send the *IDN? default command. The instrument’s response
should appear in the
Instrument Session History panel.
7 If the Connection Expert can successfully communicate with the
U2121A, this indicates that the instrument has been installed
correctly.
N O T E
•
The IO Control will launch automatically when you start your PC.
•
Launching the VEE without the IO Control running will cause failure of the
VEE to detect or establish any connection with the U2121A connected to
your PC.
•
To run the IO Control, go to Start > All Programs > Agilent IO Libraries
Suite > Utilities > IO Control.
U2931A Operating Guide.book Page 16 Tuesday, June 10, 2008 10:17 AM