Kramer Electronics VS-88HDxl - Manual (Page 3)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
9.1 Changing the Device Parameters 24
9.2 Updating the VS-88HDxl Firmware 26
10 Kramer Protocol 3000 27
10.1 Switching Protocols 27
10.2 Kramer Protocol 3000 Syntax 28
10.2.1 Host Message Format 28
10.2.1.1 Simple Command 28
10.2.1.2 Command String 28
10.2.2 Device Message Format 28
10.2.2.1 Device Long Response 28
10.2.3 Command Terms 29
10.2.4 Entering Commands 29
10.2.5 Command Forms 30
10.2.6 Command Chaining 30
10.2.7 Maximum String Length 30
10.2.8 Backward Support 30
10.3 Kramer Protocol 3000 Commands 31
10.3.1 Device Initiated Messages 31
10.3.2 Result and Error Codes 31
10.3.3 Basic Routing Commands 31
10.3.4 Preset Commands 32
10.3.5 Operation Commands 32
10.3.6 Machine Information Commands 32
10.3.7 Identification Commands 33
10.3.8 Network Setting Commands 33
11 Hex Table (Protocol 2000) 34
12 Kramer Protocol 2000 35
Figures
Figure 1: VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 5
Figure 2: Connecting the VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 10
Figure 3: VS-88HDxl Dual-Link Inputs and Outputs 12
Figure 4: Connecting the Dual-Link VS-88HDxl 3G HD/SD-SDI Matrix Switcher 12
Figure 5: DIP-Switch Settings 14
Figure 6: Local Area Connection Properties Window 17
Figure 7: Internet Protocol (TCP/IP) Properties Window 17
Figure 8: Connect Screen 18
Figure 9: Device Properties Screen 19
Figure 10: P3K Wizard Screen 24
Figure 11: Connect Window 25
Figure 12: Device Properties Window 26