4 your pl-8 low voltage relay controller, Your pl-8 low voltage relay controller, Figure 1: pl-8 low voltage relay controller – Kramer Electronics PL-8 User Manual
Page 6
Your PL-8 Low Voltage Relay Controller
3
•
Can be controlled by Kramer SummitView™ control units such as the
SV-551
, RC-62 and RC-63
•
Can be upgraded via RS-232
•
Is housed in a Kramer TOOLS enclosure and is 12V DC fed
Achieving the best performance means:
•
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
•
Avoiding interference from neighboring electrical appliances and
positioning your PL-8 away from moisture, excessive sunlight and dust
Caution
– No operator-serviceable parts inside unit.
Warning
– Use only the Kramer Electronics input power
wall adapter that is provided with this unit
.
Warning
– Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your PL-8 Low Voltage Relay Controller
Figure 1 and Table 1 define the PL-8:
Figure 1: PL-8 Low Voltage Relay Controller
1 For example: model number AD2512C, part number 2535-000251