Kramer Electronics RC-78R - Manual (Page 14)

RC-76R/RC-78R - Connecting the RC-76R/RC-78R 11
To ground the RC-76R/RC-78R:
1. Connect the ring tongue terminal to the building grounding point wire (a
green-yellow, AWG#18 (0.82mm
2
) wire, crimped with a proper hand-tool is
recommended).
2. Insert the M3x6 screw through the toothed lock washers and the tongue
terminal in the order shown above.
3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue
terminal) into the grounding screw hole and tighten the screw.