Kramer Electronics Site-CTRL™ - Manual (Page 8)

6 Site-CTRL - The Room List Tab
4 The Room List Tab
The Room List tab displays the status of the Kramer room controllers in a summarized layout, and lets you identify the
room by its IP number, name (for example, Science Lab 1), or description. From this screen the user can also monitor
the status of the main display (on, standby and so on), monitor the projector lamp hours of the main display (per room)
and perform routine procedures such as initiating a simple ON/OFF macro (via Web Access ).
The Room List tab lists the status of the rooms controlled by the Site-CTRL system. Figure 6 shows the Room List tab
features and functions.
Figure 6: The Room List Tab – for the Administrator
Features Function
New Location Area Lists the sites that are controlled. Each site can include several rooms. You can rename a room, add
a new room or delete a room
Filter Area IP: lets you observe only a room with a certain IP number
Name: Lets you observe defined room names only (the name is case sensitive)
Room Status: Select the room status types to be displayed (OK and/or Error)
Turn Rooms On Button Initiates the All On sequence (as configured in K-Config) to all the room controllers in the list
Turn Rooms Off Button Initiates the All Off sequence (as configured in K-Config) to all the room controllers in the list
The Room List Table Enabled Enables access to the different actions related to the room (for the administrator
only)
Room Status Indicates the room status
Name Indicates the room name
IP Indicates the IP address of the room controller
Display Status Indicates the status of the main display as defined in the K-Config port manager
setup (for example, the room projector)
Lamp Hour Shows the lamp hours [%] of the projector lamp for the main display in the room
Description Shows the room description (entered by the administrator via the Settings tab)
Actions Displays the actions you may take with the selected room controller:
Web
– Open the Web Access page
On – Activates the All On event macro (defined in K-Config)
Off – Activates the All Off event macro (defined in K-Config)
Password – Change the password for accessing the machine (for the administrator
only)
Refresh
– Refresh the information line
Delete – Delete the information line (for the administrator only)
Update Time Button Click to update the scheduling time to all the room controllers on the list (see Section 4.3.1 )
Update Firmware Button Click to update the room controllers' firmware in the list (see Section 4.3.2 )
Update Configuration
Button Update the configuration (as configured in K-Config) to all the room controllers in the list (see
Section 4.3.3 )
Refresh All Button Click to refresh this window