Installation, Storm series in-wall speakers, Wiring – ATON Storm Series A82SW User Manual
Page 5: Left spk, Wiring, mounting and set- ting switches, Figure 3.1 - wiring label & plastic bag
© 2007 • All rights reserved. 3
Storm Series In-wall Speakers
TV
A82SW
X
O
V
E
R
X
O
V
E
R
80
80
120
120 180
180
A82SW
X
O
V
E
R
X
O
V
E
R
80
80
120
120 18
0
180
OR
OR
Figure 2.3 - 5.1 Home Theater Application w/ Passive Subwoofers (A82SW)
3. Installation
The Installation process is divided into three distinct processes:
Wiring, Mounting and Set-
ting Switches.
After carefully considering the intended application (Defi ning a Listening Area,
Mono/Stereo, Home Theater, etc.), specifi c mounting locations can be decided upon. Once the
specifi c locations are determined, installation can commence.
Wiring
Before actually running any wire or cable, take the time to look around each room or area of the
house and plan your wire paths for maximum effi ciency. Look for routes through uncluttered
parts of the stud wall or ceiling that allow you to group all low-voltage (video, speaker wires,
Cat-5, telephone, etc.) wires wherever possible. It is a good practice to label both ends of all
cables and to protect wires by tying a plastic bag over the ends.
LEFT
SPK
Plastic Bag
Label
Figure 3.1 - Wiring Label & Plastic Bag