Kramer Electronics FC-49 - Manual (Page 9)

6 FC-49 - Connecting the FC-49 DVI / Audio to HDMI Converter
4 Connecting the FC-49 DVI / Audio to HDMI
Converter
Always switch off the power to each device before connecting it to your
FC-49. After connecting your FC-49, connect its power and then switch
on the power to each device.
To connect the FC-49, as illustrated in the example in Figure 2 do the following:
1. Connect the HDMI OUT connector to the HDMI acceptor (for example, an
LCD TV with built-in speakers).
2. Connect the DVI source, for example, a multimedia player (or a PC) to the:
 DVI IN connector
 S/PDIF (digital audio) RCA IN connector (or you can connect the audio
source to the ANALOG or OPTICAL audio connector)
Note: S/PDIF in the FC-49 supports stereo audio and not 5.1 channel
audio.
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 2 ).
Figure 2: Connecting the FC-49 DVI / Audio to HDMI Converter
!
i