Alamo Machete 2 02986941C - Manual (Page 86)

OPERATION
MACHETE 2 11/08 Operation Section 3-38
©2008 Alamo Group Inc.
OPERA
T
ION
Grass Flail
• The Grass Flail head is rated for cutting grass
only.
• The Grass Flail operates attached to the boom
arm, and is ideal for cutting hard to reach
areas where a smooth cut is required.
• Cutting height ranges from 3/4” to 4” in
vegetation. Cutting height is set by adjusting
the height of the roller assembly.
• When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals with a 100 yards.
Debri tends to fly out at great speed and can
injure or even cause death.
OPS-B- 0040
FML 100 Shredder
• The FML 100 Severe-Duty Shredder is
designed for cutting material up to 6” in
diameter and then shredding the cut debris
into 3/4” diameter chips.
• It has a cutting width of 3’2”.
• Suggested cutting speed is 1st gear. Slow
down for thick, dense, or hard material.
• Open the retractable hood when cutting large
diameter vegetation to allow access to the
cutting knives. Close the hood to cut fallen
limbs into 3/4” mulch size pieces.
• When operating near the ground or when
mulching be particularly careful that there are
no bystanders or animals within a 100 yards.
Debri tends to fly out at great speed and can
injure or even cause death.
• Operate tractor in lowest gear to allow shredder time to mulch limbs.
OPS-B- 0041