Antec Sonata Solo White - Manual (Page 7)

6
7. Two sets of wires with two SATA drive connectors at one end and a 6-pin
PSU connector at the other end.
Note: The SATA connectors include a +3.3V output so you can power the
latest SATA devices.
Modular Cables:
# Quantity Part Name Description
1-3 1 Power supply Includes 24-pin main connector and a
4+4-pin +12V connector
4 1 14 cm Molex to
Floppy connectors
w/cable Includes one Molex and two floppy
connectors
5 2 60 cm PCI Express
connector w/cable Includes one PCI Express connector
6 2 77 cm Molex
connector w/cable Includes three Molex connectors
7 2 73 cm Serial ATA
connector w/cable Includes two Serial ATA connectors
Installation:
This PSU is backwards compatible to previous ATX specifications. To make sure
you connect your PSU properly, please refer to the user manual supplied with your
motherboard and peripherals before connecting the NeoPower to any of your devices.
1.
Connect the 24-pin main power connector. If your
motherboard uses a 20-pin connector, detach the
4-pin attachment on the 24-pin power connector
(see pictures 2 and 3).
Note: the detachable
4-pin section cannot be used in place of the 4-pin
+12V connector.
2. Connect the 4-pin or 8-pin +12V connector as
needed for your motherboard.
3. In the package, you will find 2 sets of power supply-to-peripheral
Molex connectors. Connect the 6-pin connector to any of the 6 pin sockets
on the PSU and connect the peripheral Molex connectors to your peripheral
devices. Repeat as necessary.
4.
In the package, you’ll find 2 sets of power supply-to-SATA connectors. Connect
the 6-pin connector to any of the 6-pin sockets on the PSU and connect a
SATA connector to your SATA drives. Repeat as necessary.
5. In the package, you’ll find one PCI Express graphic card connector. It’s the
only 6-pin connector with 3 yellow wires and 3 black ones. Connect the 6-pin
connector to any of the 6-pin sockets on the PSU and connect the 6-pin
PCI Express connector marked “PCI-E” to your PCI Express graphic card if
needed.
Note: Please consult the user manual supplied with your PCI Express
graphic card for detailed usage instructions.
6. If you have a floppy drive, connect the Y-adapter to any of the Molex connectors
and connect the female floppy power connector to your floppy drive.
Picture 2 Picture 3
For 24-pin
motherboards
For 20-pin
motherboards