WIKA PGS23.063 - Manual (Page 4)

WIKA operating instructions model 232.3x.063 with 851 per ATEX 4
GB
11041781.03 03/2011 GB/D/F/E
1. General information
■ The pressure gauge described in the operating instructions has been
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling
the pressure gauge. Working safely requires that all safety instructions
and work instructions are observed.
■ Observe the relevant local accident prevention regulations and general
safety regulations for the pressure gauge's range of use.
■ The operating instructions are part of the product and must be kept in
the immediate vicinity of the pressure gauge and readily accessible to
skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operat-
ing instructions prior to beginning any work.
■ The manufacturer‘s liability is void in the case of any damage caused
by using the product contrary to its intended use, non-compliance with
these operating instructions, assignment of insufficiently qualified skilled
personnel or unauthorised modifications to the pressure gauge.
■ The general terms and conditions contained in the sales documentation
shall apply.
■ Subject to technical modifications.
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PM 02.04 and PM 02.11
1. General information