Conventions – AT&T 7406BIS User Manual
Page 18
●
System 85 exists in several versions. In some cases, a feature operates differently
with one version than it does with another; where this occurs, the procedures
include a release (R) and version (V) notation. Be sure to follow the directions
corresponding to the release and version you are using. Ask your System Manager
if you do not know the release and version you have.
Note:
You must press [
Shift
] before you use any of the top-labeled features on
shiftable buttons. Also, if you receive an intercept tone (high-pitched, alternating high
and low tone) while attempting to operate any feature, you have taken too much time
to complete a step, have made a dialing error, or do not have the feature available to
you. If appropriate, hang up or press [
Drop
], get dial tone, and begin at the first step.
Conventions
The following conventions are used in the procedures:
Italic procedure steps
Procedural steps in italic type are steps that you should
follow if you do not have a button assigned for the
feature.
[
xxxxx
]
A box representing a call appearance that is used
exclusively for placing, receiving, or holding calls.