WIKA Hydra-Gauge - Manual (Page 4)

4 WIKA operating instructions HYDRA-Gauge
9015329.01 08/2013 GB/D/F/E
GB
1. General information
1. General information
■ The pressure gauge described in the operating instructions has been designed and
manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during produc-
tion. Our management systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■ Observe the relevant local accident prevention regulations and general safety regula-
tions for the instrument’s range of use.
■ The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■ The manufacturer’s liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
■ The general terms and conditions contained in the sales documentation shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: SP 99.20
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or
damage to equipment or the environment, if not avoided.
Information
… points out useful tips, recommendations and information for efficient and
trouble-free operation.