WIKA 55 - Manual (Page 4)

GB
12968065.04 10/2013 GB/D/F/E
4 WIKA operating instructions models 53, 54, 55
1. General information
■ The bimetal thermometers described in the operating instructions
have been designed and manufactured using state-of-the-art
technology. All components are subject to stringent quality and
environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on
handling the bimetal thermometer. Working safely requires that all
safety instructions and work instructions are observed.
■ Observe the local accident prevention regulations and general
safety regulations, in effect for the bimetal thermometer‘s range of
use.
■ The operating instructions are part of the instrument and must
be kept in the immediate vicinity of the bimetal thermometer and
readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the
operating instructions, prior to beginning any work.
■ The manufacturers liability is void in the case of any damage
caused by using the product contrary to its intended use,
non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised
modifications to the bimetal thermometer.
■ The general terms and conditions, contained in the sales
documentation, shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TM 53.01, TM 54.01, TM 55.01
1. General information