WIKA 73 - Manual (Page 6)

GB
12099431.05 10/2010 GB/D/F/E
6 WIKA operating instructions models 73, 74, 75
2.1 Intended use
These gas actuated thermometers are mainly used in the process
industry for monitoring the process temperature.
The gas actuated thermometer has been designed and built solely for
the intended use described here and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the gas
actuated thermometer outside of its technical specifications requires
the instrument to be taken out of service immediately and inspected
by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2.2 Qualification of personnel
WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and
damage to equipment.
■ The activities described in these operating instructions
may only be carried out by skilled personnel who have
the qualifications described below.
■ Keep unqualified personnel away from hazardous
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-
specific regulations, current standards and directives, are capable
of carrying out the work described and of independently recognising
potential hazards.
2. Safety