Gb 1. general information 1. general information – WIKA CEP1000 User Manual

Page 4

Advertising

WIKA operating instructions, model CEP1000

11570351.02 10/2010 GB/D/F/E/I

1. General information

■

The loop calibrator described in the operating instructions has been manufactured

using state-of-the-art technology.

All components are subject to stringent quality and environmental criteria during

production. Our management systems are certified to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instru-

ment. Working safely requires that all safety instructions and work instructions are

observed.

■

Observe the relevant local accident prevention regulations and general safety regula-

tions for the instrument's range of use.

■

The operating instructions are part of the instrument and must be kept in the immedi-

ate vicinity of the instrument and readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instruc-

tions, prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the

product contrary to its intended use, non-compliance with these operating instruc-

tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-

cations to the instrument.

■

The general terms and conditions, contained in the sales documentation, shall apply.

■

Subject to technical modifications.

■

Factory calibrations/DKD/DAkkS calibrations are carried out in accordance with

international standards.

■

Further information:

- Internet address:

www.wika.de / www.wika.com

- Relevant data sheet:

CT 81.01

- Application consultant:

Tel.:

(+49) 9372/132-9986

Fax:

(+49) 9372/132-217

Advertising