WIKA CPC2000 - Manual (Page 12)

12 WIKA operating instructions, model CPC2000
11155094.02 07/2012 GB/D/F/E
GB
4. Design and function
4. Design and function
4.1 Short description
The microprocessor controlled CPC2000 low-pressure controller is used for the
■ simple generation of positive and negative reference pressures.
■ pressure measurement of positive and negative pressures.
■ differential pressure measurement.
■ identification of leaks in test samples.
4.2 Scope of delivery
■ Model CPC2000 portable low-pressure controller
■ Power supply unit
■ Operating instructions
■ 3.1 calibration certificate per DIN EN 10204 (optional DKD/DAkkS certificate)
Cross-check scope of delivery with delivery note.
4.3 Electrical connections on the rear
-
+
Actual pressure
value
Pressure value
Controller Pump
Measuring
pressure
USB Interface
RS-232 Interface
Connection for power supply unit
Microprocessor
Set-actual value
comparison Valves
pos. pressure
neg. pressure
RS-232 PC interface
USB interface
Display