WIKA PU-448 - Manual (Page 17)

GB
WIKA operating instructions programming unit PU-448 17
14003501.02 02/2014 GB/D/F/E
software, please go to www.wika.com. It can only ever
be used in connection with a single device. Start the
software by double-clicking on the WIKA_T12, WIKA_TT
or WIKAsoft-TT icon. During data transmission, do not
break the connection with the transmitter, since the data
may not be correctly read as a result of this.
9. Maintenance
The programming unit described here is maintenance-free!
The electronics incorporate no components which could be repaired
or replaced.
Repairs must only be carried out by the manufacturer.
10. Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an
environmentally compatible way and in accordance with the country-
specific waste disposal regulations.
8. Configuration of the ... 10. Disposal