RADWAG Scales of WPT series - Manual (Page 32)

12.4. Tare function
This parameters enables users to configure a tare function.
Procedure:
• Enter the submenu <P1.rEAd> and then:
tArA AtAr - automatic tare function on and is stored in balance
memory after unplugging it from mains (Description
of function operating point 15.6 automatic tare)
tArA no - automatic tare function off (user can turn on
operating of automatic tare F6 AtAr – till unplugging
the balance from mains)
tArA tArF - tare memory function – stores last value of tare in
balance memory. It is automatically displayed after
starting the balance. Value of tare is displayed with
minus sign, and there is Net symbol indicated on the
display. (user can turn on operating of automatic tare
F6 AtAr – till unplugging the balance from mains)
Return to weighing:
See - 10.2.2.
- 32 -