Selecting quantity of operation modes, Of operation modes, Selecting quantity – RADWAG Scales of WPT series User Manual
Page 44
Advertising
no
– mode is disabled
YES
– mode is enabled
Return to weighing:
See 10.2.2.
15.2. Selecting quantity of operation modes
This function enables user to set if ,after pressing
key, all operating
modes will be accessible (ALL) or only one from the list chosen and
used by operator.
Procedure:
• Enter the submenu <P4.Func> and then:
After choosing setting press
key. The program will return
to displaying name of submenu <P4.1.FFun>.
Return to weighing:
See 10.2.2.
- 44 -
Advertising
This manual is related to the following products: