RADWAG Low profiled scales - Manual (Page 26)

12.1. Setting a filtering level
Procedure:
• Enter the submenu <P1.rEAd> and then:
1 - 4 - level of filtering
• By
pressing select the filtering level you need
Notice:
Filtering level influences the time of stabilization. The higher the filtering
level is the longer stabilization time is needed.
Return to weighing:
See - 10.2.2.
12.2. Median filter
This filter eliminates short changes (impulses) of measure signal
(e.g. shocks).
Procedure:
• Enter the submenu <P1.rEAd> and then:
- 26 -