RADWAG WTB 600/AU Carat Balance - Manual (Page 31)

a) Parameter <CHr6> set to <no>:
• Pictogram
does not appear, charging disabled.
• During software initializing, after turning on „bAtt”.
b) Parameter <CHr6> set to <YES>:
• Pictogram flickers slowly (interval about 2 seconds),
charging is enabled.
• Message
„nImh” appears on the display,
• In case of damaging accumulators or their absence, the pictogram
flickers quickly (interval about 0.5 sec).
Caution:
Balance comes standard with a set of rechargeable batteries
NiMH R6 (AA) and a power adapter.
Procedure:
• Enter the submenu <P5.othr> and then:
CHr6 YES - enabled
CHr6 no - disabled
- 31 -