RADWAG E2R Weighing Records - Manual (Page 23)

Type
Type of connection with the scale:
• Radwag.Devices.PUE7.PUE7Encoder –
Connection of industrial scales WLY,
WPY
and HTY series with the standard program,
• Radwag.Devices.PUE7.PUE7KtpEncoder –
Connection of industrial scales WLY,
WPY
and HTY series in the CPG mode,
• Radwag.Devices. PUE7.PUE7PcsEncoder –
connection with scales based on PUE7 and
HY indicator (version with a special program
of parts counting),
It does not concern the standard program of
parts counting mode.
• Radwag.Devices.PUE41.PUE41Encoder –
Connection with
PUEC41H indicator,
• Radwag.Devices.PUE7Lab.PUE7LabEncode
r
–
Connection with a 3Y laboratory scale,
• Radwag.Devices.PUE7Lab.Y3KTPEncoder –
Connection with a 3Y laboratory scale in the
CPG mode,
• Radwag.Devices.DynWin.DynWinEncoder –
connection with a dymanic scale,
• Radwag.Devices.WeightDryer.WeightDryer
Encoder
– connection with a MAX or PMC
series moisture analyzer,
• Radwag.Devices.PUE4L.PUE4LEncoder –
connection with scales based on PUE4L
indicator,
Serial Nr.
The scale serial number
Adres
Address set up for the scale, by default 1.
Numer
platformy
Platform number, by default 1.
For a HTY scale select the following setting in the box Type:
Radwag.Devices.PUE7.PUE7Encoder.
23