Axis Communications 212 PTZ-V - Manual (Page 3)

AXIS 212 PTZ/ AXIS 212 PTZ-V Installation Guide Page 3
ENGLISH
Introduction
This guide provides instructions for installing the AXIS 212 PTZ/AXIS 212 PTZ-V Network
Camera on your network. For all other aspects of using the product, please see the AXIS 212
PTZ/AXIS 212 PTZ-V User’s Manual, available from www.axis.com or on the Axis Network
Video Product CD.
1. Check the package contents against the list below.
2. Install the hardware on page 5
3. Set the IP address on page 7.
4. Set the password on page 13
Package contents
Item Title/Variants
Network Camera AXIS 212 PTZ/AXIS 212 PTZ-V
Indoor power adapter
Note: The power adapter is country
specific, please check that the type of
power adapter you are using is correct Europe
UK
Australia
USA/Japan
Argentina
Korea
Extension cable 1.8m (5.9 ft.) Power cable
Terminal block connector 4-pin I/O connector block
Mounting kit Screwdriver for tamper-proof screws
Tamper-proof screws (16mm)
Drill template
Angled wall mount - inc. screws (12mm)
Screws (38mm) and plugs for wall mount
Printed material AXIS 212 PTZ/AXIS 212 PTZ-V Installation Guide
Axis Network Video Product CD
Warranty document
Important!
This product must be installed in
compliance with local laws and
regulations.