Rana Systems Elite Series - Manual (Page 252)

ELITE SERIES USER MANUAL ENHANCED CP/M UTIL.
concerning “bootability” of system copies.
After you’ve plowed through all of the above
confusion, and finally decide you’ve chosen the
right command and then hit <RETURN>, COPY will
respond with:
Insert SOURCE disk into drive <source>:
Insert TARGET disk into drive <target>:
Press RETURN to begin
provided your <source> and <target> are two
different drives. If your <source> and <target>
are the same drive, then COPY will say:
Insert SOURCE disk and press RETURN
Insert the diskette(s) COPY requests, and then
press <RETURN>.
On single drive copies, COPY will first read in
as much information as it can into memory from
the source diskette, and then say:
Insert TARGET disk and press RETURN
You should then insert the requested diskette
and press <RETURN>.
Single drive copying will continue like this
until all the information is copied. Two drive
copies will run all the way through without any
assist from you.
P a g e 1 0 - 2 1