EasyN H3 Series User manual - Manual (Page 19)

MH3E-E-A2 - 18 -
button to add device to area.
◆ Add device manually:
Click button then pop up add device dialog, as below:
【 Name】Device name, support custom, length less than 30 byte.
Only display name instead of IP after input name.
【
Channel】Support different channel on case that one device has many
channels, presently device only supports one channel.
【 IP or Domain name】Device IP or domain name
【 Port】Device http port, default is 80
【 User name】Device login name, default is admin
【 Password】Device login password, default is admin
【 Area】Device displaying area
After input all needed information, click OK button to finish ADD
2.3.2 Group management
◆ Add group:
Click button, input group
name into pop-up dialog then click OK
Notice: support 20 groups
 ◆ Configure group