Nilfisk-ALTO 30/BATT/PC/XC - Manual (Page 21)

19
ATTIX 30-40-50
1) Optional accessories / Option depending on model
7.2.4 Replacing filter element
(Push & Clean System)
Never use the vacuum clean er with-
out a filter.
Switch off the vacuum clean- 1.
er and pull the mains plug
out of the socket.
Open the retaining clamps
2.
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter element:
Turn the filter holder anticlo- 3.
ckwise and remove it .
Carefully remove the filter el-
4.
ement.
Clean the filter seal (B).
5.
Check it for damage and re-
place it if necessary.
Inserting the filter element:
Fit the filter holder and turn it 6.
clockwise to secure it.
Fit the filter holder and turn it
7.
clockwise to secure it.
Dispose of the used fi
l- 8.
ter element in accord-
ance with legal regulations.
Attach the upper section of 9.
the vacuum cleaner.
Close the retaining clamps
10.
(A). Ensure that the retaining
clamps fit properly.
A A
A A
B