Operating your avistart – Avital AVISTART 3001 User Manual

Page 6

Advertising
background image

Operating Your AviStart

Remote Engine Start - Safety and Counter-Theft

I

CAUTION: Be sure to read the "WARNING" bulletin on the inside
cover of this manual before attempting to operate remote start.

Automatic Safety and Counter-Theft Features
Before remote starting your engine, the AviStart system will automatically
perform a safety check to ensure the following conditions have been met:

• Brake pedal is not depressed.
• Engine and ignition are turned "OFF."
• Hood is closed.

After remote starting your engine, the AviStart system will shut off the engine
immediately if the ignition is "OFF" and any of the following occurs:

• The hood is opened.
• The brake pedal is pressed.
• The remote control START button is pressed.
• The 20 minute run time expired.

Visual Fault Indication

When you press the remote control button to start your engine, AviStart's
built-in fault detection system will automatically scan all of the safety zones. If
a fault is detected, the system will prevent your engine from remote starting
and provides a visual indication to show where the fault has occurred. The
parking lights will flash 1 time if a hood switch fault is detected, 3 times if a
brake switch fault is detected and 4 times if the system is in "Protected Valet
Mode" (see page 7 for a description of this feature). If this occurs, you may
need to bring your vehicle to your authorized Avital dealer for service.

Remote-Controlled Door Lock/Unlock*

To Lock the Doors

Press the remote control

C

button for 1-2 seconds. The doors will lock and the

parking lights will flash twice.

* If your system was installed with this door lock/unlock feature,

all other door lock/unlock related features will apply.

4

AviStart 3001 Owner's Manual

Advertising