iRobot Mint 4200 - Manual (Page 18)

PAGE 18
Maintenance
To keep your Mint in the best working condition, follow these
maintenance steps regularly.
Check tires to make sure they are in good condition before each use.
Use a damp cloth to wipe off dust and dirt on tires. Make sure that Mint
is not plugged in and that the cloth is not dripping.
Use a dry cloth to wipe dust or dirt from Mint’s exterior. Do not rinse
or submerge in water.
Place Mint on its end (handle side down) when charging or storing between uses.
For long term storage, remove C batteries from the NorthStar Navigation Cube
and remove the rechargeable battery from Mint by following these steps:
Remove the battery door cover on the bottom of the cleaner with
a screw driver.
Disconnect the rechargeable battery pack from the small white plug and `
remove the battery.
Replace the battery door and tighten the screw.
Store Mint on end, in its original packaging.
Replacement Parts
Replacement parts are available including:
Removable magnetic pad
NorthStar Navigation Cube
Rechargeable battery
Charger
To purchase or view a full list of available parts visit
www.mintcleaner.com.