Maintenance and adjustment – iRobot Verro 600 User Manual
Page 14
1
iRobot Verro Owner’s Manual
Maintenance and Adjustment
rinsing Verro
iRobot recommends that you rinse Verro with a garden hose after using it.
This will extend the life of the plastic and keep your robot looking good for
years to come.
storage
Store Verro in a dry place out of direct sunlight at a temperature between
50 and 104 degrees Fahrenheit. The Power Supply is water resistant,
but not waterproof and may be damaged by rain. Important: Failure to prop-
erly store Verro will result in loss of warranty.
Changing the Brushes
Eventually, Verro’s brushes will need to be replaced. It is time to replace
them when Verro is riding on its side tracks instead of on the brushes.
Please read these instructions carefully before proceeding. If you have any
difficulty, please call our customer care representatives at ...
They will be happy to provide assistance.
Place Verro upside down on a towel and remove the filter bag assembly.
(p. 12)
Locate the side of the robot with the drive belts.
Remove the four screws that hold on the corresponding plate.
1
Unplug the Power Supply. (Please keep the plug away from contact
with water.) Unplug the floating power cord (turn the locking collar
counter-clockwise to unlock it) from the Power Supply.