Airlink AWLH3025 - Manual (Page 22)

- 18 -
WEP
Configuration
Authentication The authentication type defines ID verification and
access privileges of roaming wireless network
cards.
You may choose from Open System, Shared Key,
or Auto Switch.
Open System: If your access point/wireless router
is using "Open System" authentication, then the
wireless adapter will need to be set to the same
authentication type.
Shared Key: Shared Key is when both the sender
and the recipient share a secret key.
Auto Switch: Select Auto Switch for the adapter
to automatically select the appropriate
authentication mode.
Encryption 1-4 WEP (Wired Equivalent Privacy) encryption can
be used to ensure the security of your wireless
network. Select one Key and Key Size then enter
the appropriate key value in the Encryption field.
Note: You must use the same Key #, Key Size, and
Encryption Key on both the host and destination
devices in order to establish a connection.
KEY1 ~ KEY 4：You can specify up to 4 different