KMW Communications PAC PC - Manual (Page 3)

KMW Communications
•
DOWNLOAD
Used to download new version of the PAC program to the PAC’s ROM.
7.7. Getting Started
7.7.1. Port Setup
Select Port menu from the window (Figure 4-4) and select Port Set menu from the pull-down
menu to launch PORT Properties setup window (Figure 4-5).
Figure 4-4. Port Setup Menu
Figure 4-5. PORT Properties Window
Select the serial port number (COM1, for example) that is connected to the PAC, set BAUD
rate to 19200 bps, DATA BIT to 8 Bits, PARITY BIT to None, STOP BIT to 1 Bit, and click ‘OK
(O)’ button.
Note: Once the port properties have been set up, the configuration is stored on to the PC so
that the selected port is automatically connected and opened the next time the program is ran.
7.7.2. User Information
Select View
Æ User Information from the menu or click USER INFO button to set up the
authorized user information.
Page 25 of 34 Portable Antenna Controller KC-50-0001-03
User’s Guide 10/17/05