KMW Communications AMS Lite - Manual (Page 10)

Sheet 10 of 30 Sheet 10 of 30 8/17/2008
©
CONFIDENTIAL
- AISG v2.0 7.1
0x01: RET
0x02: TMA
Maker ALD Manufacturer 2Byte
Serial ALD Serial NO. 17Byte
Model ALD Model 15Byte
ROM Ver ALD S/W Version
H/W Ver ALD H/W Version
Tilting Deg. Antenna Tilt Degree
Steering Deg. Antenna Azimuth Degree
TMA Gain Gain 13dB Fixed
Link Alarm Normal: Green, Alarm: Red
Communication error.
(When disconnected or
the information between ALD and
TICU are different)
Connect Connect: Green, Not Connected: Red
) Alarm Code List
Displays return codes specified in AISG 2.0.
- 3GPP TS 25.463 V6.4.0 Annex A: Return codes for secondary devices
- AISG Standard No. AISG v2.0 Annex B: Return Codes for AISG ALDs
ITEM Description Remark
Motor Jam Motor cannot move
Actuator Jam Actuator jam has been detected. No movement of the actuator,
but movement of the motor was detected
Busy The device is busy and cannot respond until an ongoing activity
is completed
CheckSum Error Checksum incorrect for otherwise valid data.
Not Calibrated The device has not completed a calibration operation, or
calibration has been lost
Not Configured Actuator configuration data is missing
Hardware Error Any hardware error, which cannot be classified. May not be
reported as an alarm until the fault is likely to be persistent
Out of Range A parameter given by an operator (e.g. tilt value or memory
offset) is out of range