KWorld PE-360-D - Manual (Page 3)

1.3 Hardware Installation
Please follow the steps & connection chart shown below for installation of your TV TV Card and follow the
pictorial guide below for peripheral connections.
1. Warning: Installation Hazard
Please exercise precaution when installing your TV tuner card!
A. Shut down your computer.
B. Unplug the main computer.
C. Press the power button for 3 seconds. (To ensure your computer is
completely powered-off.)
D. Open the cover of your main computer.
2. Please choose an available socket for your product and connect your TV
tuner card with the motherboard.
3. Please remove the Power SW pin (CON1) of your PC from the motherboard,
connect it with the Power Switch cable (CON2), plug CON3 on the Power Switch
cable to the Power Pin on the motherboard, and plug CON4 on the Power Switch
cable to the connector on your TV tuner card.
4. Please place the “Internal AV Input Kit” in a PCI or PCI Express Card Slot
and connect CON5 to the connector on your TV tuner card.
5. Please put your PC case back together and reboot your computer.
6. When you reboot your computer, for all system newer than Windows XP will
automatically detect the new hardware and launch “Found New Hardware
Wizard”: when this happens please click on the “cancel” button.
3