KWorld M130 - Manual (Page 13)

© 2011 KWorld
12
FOUR
FAQ
Q1: The media player unit does not function, what should I do?
Q2: There is no picture on the screen, what to do?
Q3: Why can’t I play my movie file?
Q4: Why can’t I adjust subtitle?
A: It could be that the unit is loading data from the USB / SD/ MMC storage device
and it may take a while. However, if you are sure that the unit does not function,
please try to unplug the power adapter and plug it again.
A:Please check the followings:
1.Please check if the power adaptor is properly connected;
2.Please make sure if the AV, YPbPr ,VGAor HDMI cable is connected
appropriately;
3.Remove the SD/MMC memory card or USB device and then plug in again after
the unit turned on normally;
4.If you connect media player to TV with AV Cable, please set TV source(output) as
TV/PAL/NTSC(according to the type of TV), press AV button on remote control to
set the media player output as AV;
5.If you connect media player to TV with YPbPr Cable, please set TV
source(output) as YPbPr, press YPBPR button on remote control to set the
media player output as YPbPr;
6.If you connect media player to TV with HDMI Cable, please set TV source(output)
as HDMI, press HDMI button on remote control to set the media player output as
HDMI;
7.If nothing still shows on TV, please connect your local distributor.
A:Please double check the movie formats supported by this media player and then
make sure the media player functions normally. If the movie format you wish to
play is supported by this media player, please try to reboot the unit. If it still does
not work. It is possible the format is not supported by this media player.
A:Please keep in mind that some video or movies you download from internet come
with subtitles, which means once you have downloaded the movie, the subtitles
are there already. In that case, you cannot use the subtitle functions of this media
player to make any change for the subtitles of these movies.